How To Replace Samsung Range Membrane Switch

How To Replace Samsung Range Membrane Switch

Introduction A Comprehensive Guide to Replacing a Samsung Range Membrane Switch

Samsung ranges have become popular choices in modern kitchens, offering a wide range of cooking options and advanced features. However, over time, certain components may require replacement, such as the membrane switch. The membrane switch is a vital part of the range’s control panel, allowing you to select various functions and settings. In this blog post, we will provide you with a detailed step-by-step guide on how to replace a Samsung range membrane switch. By following these instructions, you can restore your range to its optimal functionality and continue enjoying its cooking capabilities.

Section 1: Understanding the Membrane Switch in a Samsung Range

Before diving into the replacement process, it is crucial to grasp the role of a membrane switch in a Samsung range. The membrane switch serves as the interface between the user and the range’s control panel. It consists of a flexible panel with touch-sensitive buttons that register your commands, allowing you to control the various functions, timers, and settings of your range.

Section 2: Tools and Safety Precautions

To ensure a safe and successful replacement, it is essential to gather the necessary tools and take precautionary measures. Here’s a list of tools you will need:

  1. Screwdriver set (typically Phillips and/or Torx)
  2. Needle-nose pliers
  3. Multimeter for testing electrical continuity (optional but recommended)
  4. Safety gloves and goggles to protect against electrical hazards
  5. A replacement membrane switch (obtain the correct part number specific to your Samsung range model)

Always prioritize safety by disconnecting the range from the power source before initiating any repair work. Exercise caution throughout the process to prevent injury.

Section 3: Accessing the Membrane Switch

To replace the membrane switch on your Samsung range, you need to gain access to the control panel. While the process may vary slightly based on the model, the following steps provide a general guideline:

  1. Disconnect the power: Unplug your range from the electrical outlet or switch off the circuit breaker that supplies power to the appliance. Allow the range to cool down before proceeding.
  2. Remove the control panel cover: Locate and remove the screws securing the control panel cover to the range. These screws are typically found on the top or bottom of the panel.
  3. Disconnect the wire harness: Carefully detach the wire harness connectors from the control panel. Take note of their positions and orientation to aid reassembly.
  4. Remove the control panel: Unscrew the mounting screws that hold the control panel in place. Gently pull the control panel forward, releasing it from the range’s body. Be cautious of any wiring that might still be connected.

Section 4: Removing and Replacing the Membrane Switch

Once you have accessed the control panel, follow these steps to replace the faulty membrane switch in your Samsung range:

  1. Identify the membrane switch: Locate the membrane switch on the control panel. It should be a thin, flexible panel with touch-sensitive buttons and a ribbon cable connected to it.
  2. Disconnect the ribbon cable: Carefully detach the ribbon cable connector from the old membrane switch. To release the connector, you may need to lift a plastic latch or use a small flat-headed screwdriver.
  3. Remove the old membrane switch: Depending on the model, the old membrane switch may be secured with screws or adhesive. If screws are present, remove them to free the switch. If adhesive is used, gently peel off the old membrane switch.
  4. Install the new membrane switch: Take the new membrane switch and position it correctly on the control panel, aligning it with the screw holes or adhesive points. Ensure the new switch sits flush and evenly.
  5. Connect the ribbon cable: Align the ribbon cable connector with the corresponding slot on the new membrane switch. Gently push the connector in until it locks into place securely.
  6. Test the functionality: Before reassembling the control panel, connect the range to the power source and test the new membrane switch. Verify that all buttons respond accurately and that the range functions as intended.

Section 5: Reassembling the Control Panel

After confirming the functionality of the new membrane switch, it’s time to reassemble the control panel:

  1. Position the control panel: Align the control panel with the range’s body, ensuring proper alignment of screw holes.
  2. Secure the control panel: Insert and tighten the mounting screws that hold the control panel in place.
  3. Reconnect the wire harness: Carefully reconnect the wire harness connectors to their corresponding ports on the control panel.
  4. Replace the control panel cover: Align the cover properly and fasten the screws to secure it in place.


By following this comprehensive guide, you can confidently replace a faulty membrane switch in your Samsung range. Remember to prioritize safety, consult your range’s user manual if necessary, and seek professional assistance if you feel uncomfortable with any step. With a new membrane switch, your Samsung range will regain its full functionality, allowing you to enjoy the convenience and cooking capabilities it provides in your kitchen.